Sierra 200 User Manual

  

69 

Remote Base Commands 

C380 (u)  Enable remote base port transmit  

 

Enables remote base port transmit.   

 

Syntax is C380r, where r is the logical port number 0..7.   

 

Will not do anything unless the port link status is on. 

 

C381 (u)  Disable remote base port transmit 

 

Disables remote base port transmit.   

 

 

Syntax is C381r, where r is the logical port number 0..7.   

 

C382 (u)  Disconnect all remote base ports   

 

Disconnects all remote base ports (disables transmit and sets link on/off status 
to normal state).   

 

Normally used be remote base timeout. 

 

C401 (u)  Set remote base emission mode   

 

Syntax is C401rnnnn, where r is the logical port number and nnn is the 
emission type. 

 

C402 (u)  Set remote base radio frequency in MHz  

 

Syntax is C402rffffff, where r is the logical port number and ffffff 
is the frequency in MHz.   

 

C403 (u)  Set remote radio base freuquency in kHz  

 

Syntax is C403rfffffff, where r is the logical port number and fffffff 
is the frequency offset from the set band value, in kHz.