Sierra Wireless RAVEN 1X 20070914 User Manual
Configuration Commands
Rev 3.0B Feb.08
120
*HOSTPEERIP=d.d.d.d
Set or query the IP address that can be used to directly contact
the Raven once a cellular connection is established. If this
value is not specified, 192.168.13.31 will be used.
the Raven once a cellular connection is established. If this
value is not specified, 192.168.13.31 will be used.
•
d.d.d.d=local or peer IP address of the modem.
Note: This is not normally used nor needed by user applications.
*HOSTPRIVIP=d.d.d.d
Set or query the private IP address that is to be negotiated by
the 1x connection if *HOSTPRIVMODE =1.
the 1x connection if *HOSTPRIVMODE =1.
•
d.d.d.d=IP Address
*HOSTPRIVMODE=n
Set or query whether a private or public (network) IP is to be
used when the Host initiates a 1x connection to the modem.
used when the Host initiates a 1x connection to the modem.
•
n=0 : Public (network) IP Mode: When the Host initiates a
PPP connection, the host will be given the network IP
address that was obtained from the cellular carrier while
registering on the network. If the network issues a new IP
address, the cellular connection will be closed (since the IP
address has changed) and has to be re‐initiated. (default).
PPP connection, the host will be given the network IP
address that was obtained from the cellular carrier while
registering on the network. If the network issues a new IP
address, the cellular connection will be closed (since the IP
address has changed) and has to be re‐initiated. (default).
•
n=1 : Private IP Mode: When the Host initiates a 1x
connection, the host will be given the IP address specified
in *HOSTPRIVIP. The modem will then perform 1 to 1
NAT‐like address translation, which shields the Host from
network IP changes.
connection, the host will be given the IP address specified
in *HOSTPRIVIP. The modem will then perform 1 to 1
NAT‐like address translation, which shields the Host from
network IP changes.
*HOSTPW=string
Host Password for PAP or CHAP.
•
string=password
*HOSTUID=string
Host User ID for PAP or CHAP.
•
string=user id (up to 64 bytes)
PassThru
PassThru Mode is used to communicate directly to the Raven
internal hardware.
internal hardware.