Sierra Wireless RAVEN 1X 20070914 User Manual
Data Communication and Host Modes
Rev 3.0B Feb.08
59
PassThru Mode allows only specific AT commands. Some
ALEOS commands will be unavailable when the Raven is in
PassThru mode. The commands usable also depend heavily on
the modem model number (found on the label on the top of
the Raven).
ALEOS commands will be unavailable when the Raven is in
PassThru mode. The commands usable also depend heavily on
the modem model number (found on the label on the top of
the Raven).
Note: Some internal hardware requires upwards of 20 seconds
before AT commands can be entered, so be patient if there seems to
be no response to AT commands.
before AT commands can be entered, so be patient if there seems to
be no response to AT commands.
Telnet Mode
In AceManager you can configure Telnet operation.
Figure 6-3: AceManager : S0
If you need to change the port for Telnet (for example, you
have the default port blocked on your firewall), the option is
on the Other tab. The default telnet port is 2332. You can also
change the Telnet timeout, if the connection is idle, default 2
minutes.
have the default port blocked on your firewall), the option is
on the Other tab. The default telnet port is 2332. You can also
change the Telnet timeout, if the connection is idle, default 2
minutes.
Figure 6-4: AceManager : Other - *TPORT, *TELNETTIMEOUT.
Serial Modes
PPP
In PPP mode, the Raven acts as a PPP server, providing an IP
address, and DNS servers (if available) to the connected device
or computer.
address, and DNS servers (if available) to the connected device
or computer.