Siemens TV Converter Box G120 User Manual

 

 

 

 

 

 

 

    

 

 

 

 

T I A  Training Document

 

Page 47 of 147 

 Module  

 

     H01 

Issued: 02/2008 

  Frequency Converter SINAMICS G120 on PROFIBUS DP and PROFINET 

Preface         Notes         Startup with PROFIBUS         Startup with PROFINET         Program Example 

 
Note: 
A complete parameter list with a detailed description of all parameters, as well as overview diagrams 
of the internal program structure (function charts) are provided in the List Manual. 
 
The parameter description looks like this in the List Manual (principle): 
 
Read Mode Parameters 

 

BICO (if exist) 
È

 

 

 

 

CU240S 
CU240S DP 
   Ç 
CU/PM Variants 

: 3                     

: [Hz] 

 

: Control 

: Floating Point 

: - 

        Index 
           È 

BICO (if exist) 
È

 

 

 

 

CU240E 
CU240S 
   Ç 
CU/PM Variants 

 

: YES 

: C, T 

 

0 

: 

Commands 
  Active: NO 
 
  Max 
  6 

: Unsigned 16 

: CDS 

 
Factory setting

 

2 

 
Here, the following is described: 
• Parameter number (possibly with index) 
• Parameter text  
• Access level (depends on P0003) 
• Parameter(P) group (depends on P0004) 
• Data type (Unsigned8, Unsigned16, Unsigned32, Integer 16, or floating point) 
• Quick commissioning Yes/No 
• Active Yes (modifying the parameter values is immediately effective after input), or No (the button 
"P" on the Operator Panel (OP) has to be pressed for the changes to become effective) 
• Data set: parameters that are associated with data sets are here assigned correspondingly with 
CDS (command data set) or DDS (drive data set). 
• Can be changed in the converter mode Startup C, Mode U, or Ready T 
• Unit if there is a physical measuring unit for this parameter 
• Min indicates the lowest value to which the parameter can be set 
• Max indicates the highest value to which a parameter can be set 
• Factory setting indicates the default value for the factory setting 
 
 
Note: 
Further details are provided in the List Manual.