Manualsbrain.com
  1. Manuals
  2. Brands
  3. Siemens
  4. Network Hardware D410
  5. User Manual

Siemens Network Hardware D410 User Manual

Download
Page of 150
Commissioning (hardware) 
 
2.2 Inserting the Compact Flash card 
 
D410 
32
 
Commissioning Manual, 08/2008 Edition 
2.2 
Inserting the Compact Flash card 
Properties of the CF card 
The CF card is mandatory for operation of SIMOTION D410. The SIMOTION kernel and the 
drive control software (SINAMICS firmware) are installed on the CF card.  
The CompactFlash card must be inserted when you start up SIMOTION D410 in order to 
load the SIMOTION kernel. 
 
 
Note 
The Compact Flash Card may only be removed and inserted while SIMOTION D410 is in de-
energized state! 
 
Procedure 
Insert the CompactFlash Card as follows: 
1.  The insertion direction of the CompactFlash Card is identified by an arrow on the card 
and a matching arrow on the slot. Align the arrows when inserting the CompactFlash 
Card. 
2.  Gently push the CompactFlash Card into the card slot of SIMOTION D410 until it 
engages. The properly inserted card does not protrude from the SIMOTION D410 
housing. 
$UURZV
&RPSDFW)ODVK&DUG
6ORWIRU&RPSDFW)ODVK&DUG
 
Figure 2-1 
Inserting the CompactFlash Card