Siemens HICOM 300 User Manual
27
Configuring the Gigaset USB Adapter 300
Gigaset USB Adapter 300 / multilanguage / A31008-M1066-R101-2x-7619 / configuration.fm / 14.11.2008
Sc
hablone 200
4_12
_27
Configuration – Manual
Manual configuration of security settings is required if your access point does not sup-
port WPS or some components of your wireless network do not support WPA encryp-
tion.
Successful communication in a WLAN depends on all the PCs using the same ID (SSID)
and the same radio channel. In addition, the connected PCs must coordinate their trans-
mission mode for successful data transfer.
You can choose the basic settings for each profile in the Common section of the
Configuration tab.
port WPS or some components of your wireless network do not support WPA encryp-
tion.
Successful communication in a WLAN depends on all the PCs using the same ID (SSID)
and the same radio channel. In addition, the connected PCs must coordinate their trans-
mission mode for successful data transfer.
You can choose the basic settings for each profile in the Common section of the
Configuration tab.
ì
Select Manual for the Registration Mode
i
Only one client is allowed to connect to the access point within the two
minutes. If an error occurs, check whether another PC tried to connect to
the access point at the same time.
minutes. If an error occurs, check whether another PC tried to connect to
the access point at the same time.
Note:
For security reasons, installation should be followed by changing the SSID of your
WLAN, as the default SSID may also be known to unauthorised persons.
For security reasons, installation should be followed by changing the SSID of your
WLAN, as the default SSID may also be known to unauthorised persons.