Sennheiser DECT Comfort Calls DW Pro1/Pro2 User Manual

Using the headset system

30

The volumes can be adjusted in several steps. When the minimum or 
maximum volume is reached, you hear a double beep in the headset.

Vol –

Vol +

6

왘

To increase or reduce the volume step-by-step, push the AUDIO 
button 

 backwards or forwards.

The assignment of the AUDIO button 

 can be swapped depending 

on whether you wear the headset on the right or left ear (see 
“Swapping the assignment of the AUDIO button 

” on page 16).

Muting the headset’s microphone



6

To mute the headset’s microphone 

during

 a call (the LINK LED 

 on the 

base station lights up blue):

왘

Press the AUDIO button 

.

The microphone is muted. While the microphone is muted, you hear a 
beep in the headset every 5 seconds and the LINK LED 

 on the base 

station flashes red.

To unmute the headset’s microphone:

왘

Press the AUDIO button 

 again.

You hear a low confirmation beep in the headset. 

or

왘

Disconnect the wireless link between headset and base station (see 
page 23).

 

In both cases, the muting is canceled and the LINK LED 

 lights up blue 

again or goes off.

Using the advanced functions

Pairing additional headsets for shared use

You can use one DW series base station with different DW series

*

 head-

sets. This can be advantageous if you share a telephone workplace. The 
last headset paired to the base station can be used without more ado.

If 

no

 wireless link is established between headset and base station:

왘

Place the additional headset into the magnetic holder of the base 
station.
During pairing of the headset to the base station, the HEADSET LED 

 

flashes blue/red. If pairing was successful, the HEADSET LED 

 lights 

up blue. You can now use the newly paired headset. 

*

The DW series comprises the following products: DW Office, DW Office USB, DW Pro1/
Pro2, DW Pro1/Pro2 USB. The DW 800 is not part of the DW series.