Sennheiser WiCOS User Manual
Configuring the conference system
46
Microsoft Windows XP
operating system
If you are using
Microsoft Windows XP
, proceed as follows in order to set a
static IP address (see also the instruction manual of the operating
system):
system):
왘
Click “Start” and select “Control Panel”.
The “Control Panel” window opens.
The “Control Panel” window opens.
왘
Click “Network Connections“
A list of all the network connections on the computer appears.
A list of all the network connections on the computer appears.
왘
Right-click “Local Area Connection”.
A shortcut menu appears.
A shortcut menu appears.
왘
On the shortcut menu, click “Properties”.
The “Local Area Connection Properties” window appears.
The “Local Area Connection Properties” window appears.
왘
Select “Internet Protocol (TCP/IP)” and click the “Properties” button.
The “Internet Protocol (TCP/IP) Properties” window appears.
The “Internet Protocol (TCP/IP) Properties” window appears.
왘
Click the “Use the following IP address” option button.
왘
In the “IP address” field, type your desired IP address, e.g.
192.168.0.12.
192.168.0.12.
왘
In the “Subnet mask” field, type the subnet mask 255.255.255.0.
Both addresses have to be within the address range of the access point.
Both addresses have to be within the address range of the access point.
왘
Confirm your entries by clicking “OK”.
Do
not use
the IP address of the access point: 192.168.0.10.