Schneider Electric Communication Drivers User Manual
TSXPCX3030
154
Configuration screens for drivers using the TSX PCX 3030 cable.
At a Glance
Once the drivers of the TSX PCX 3030 cable are installed, you must select the cable
with the drivers that can use it. The compatible drivers are:
with the drivers that can use it. The compatible drivers are:
l
Uni-Telway driver, version
≥
V1.5,
l
Modbus driver, version
≥
V1.1.
Uni-Telway
driver
driver
The following table describes the procedure for declaring the cable with a
Uni-Telway driver.
Uni-Telway driver.
Step
Action
1
From the Drivers Manager, select the Uni-Telway Driver tab.
2
Click on the Configuration button.
3
Click on the Edit button.
Result: the Station parameters window appears
4
Select from the Com Port zone, the communication port associated with the
cable. For example COM3 (TSXPCX3030 Cable).
cable. For example COM3 (TSXPCX3030 Cable).
Link Parameters
Station ID
COM Port
Uni-telway Slave address
Communication Modem
Number
Base
Hayes
Tel No.
Password
Advanced
Uni-Telway
OK
Modem Used
Cancel
Parameters of the Station
[Default]
COM 3 (TSXPCX3030 Cable)
1
3