Schneider Electric Communication Drivers User Manual

Serial port

18

   

Driver installation is a standard installation. It can be launched either:

l

from the drivers’ CD-ROM,

l

or from disks if the station has no CD-ROM drive.

Use the following procedure to create installation disks:

Before installing the new driver, you must check that no other version of this driver 
exists on the station.

If a driver does exist, you must delete it before carrying out the new installation.

A previous version can be uninstalled using:

l

Drivers Manager software,

l

or the Control Panel

 → 

Add/Remove Programs.

Note: The installation disks are created from the CD-ROM.

1

Use a station with a CD-ROM drive.

2

Insert the CD-ROM into the drive.

3

Access the directory of the driver to be copied onto disk.

4

Copy the contents of the DISK1 directory onto a disk. Repeat this step for each 

DISK directory.

Note: it is advisable to number the disks.