Schneider Electric Communication Drivers User Manual
TSX FPP 20 card
43
Configuration of the Windows NT operating system
At a Glance
After the driver installation and configuration phase, the operating system shall
recognize the TSX FPP 20 card and its driver.
recognize the TSX FPP 20 card and its driver.
How to configure
the operating
system
the operating
system
The following procedure describes how to configure the operating system:
Case in which
the driver does
not start
the driver does
not start
One possibility is that the default IRQ3 is busy, in which case another one must be
used:
Follow the steps below to detect an available IRQ:
used:
Follow the steps below to detect an available IRQ:
Note: When configuring the system, it is not necessary to restart the station.
Step
Action
1
Install and configure the driver.
2
Shutdown your machine.
3
Insert the PCMCIA card into its slot.
Result:
The system automatically detects the card and loads the driver.
The system automatically detects the card and loads the driver.
Step
Action
1
In the taskbar, select "Start ->Run".
2
enter the command "Winmsd"
3
Select the tab "Resources", choose an available IRQ and confirm with OK.
4
Edit the DSCP114.REG file and modify the value of "InterruptNumber"
5
In the taskbar, select "Start ->Run", enter the command "DFPP20" and
confirm.
confirm.
6
Restart your machine.