Sanyo SRP-270 User Manual

16

Chapter 6. The self test 

 

The self-test checks whether the printer has any problems. If the printer does not function 
properly, contact your dealer. 
 

1.   Make sure paper roll has been installed properly. 

2.   Turn on the power while holding down the FEED button. The self-test 

begins.

 

3.   The self-test prints the current printer status, which provides the control 

ROM version and the DIP switch setting.

 

4.   After printing the current printer status, self-test printing will print the 

following, and pause (The PAPER LED light blinks).                                                                   

 

 

 
5.   Press the FEED button to continue printing. The printer prints a pattern 

using the built-in character set. 

6.   The self-test automatically ends after printing the following. 

 

                  The printer is ready to receive data when it completes the self-test.