Sanyo DVD Recorder DSR-5009PA User Manual
Additions and Changes to Main Unit Operating Procedures
1
English
5
Now you can forcibly interrupt the current recording session
while the <MAIN MENU> screen is displayed. Using this
feature, you can change the menu settings without changing
the current recording conditions.
while the <MAIN MENU> screen is displayed. Using this
feature, you can change the menu settings without changing
the current recording conditions.
z To interrupt the current recording session:
Press and hold the [SHUTTLE HOLD] button for about 3
seconds.
seconds.
☞
The recording indicator turns off, and all the recording
mechanisms (normal, timer, and alarm) are switched to
pause mode. During pause, you can change the menu
settings.
mechanisms (normal, timer, and alarm) are switched to
pause mode. During pause, you can change the menu
settings.
z To exit from pause mode:
Press the [EXIT/OSD] button.
☞
You are returned to the same recording status as before
you paused the recording session.
you paused the recording session.
z While recording is paused, the DVR does not accept any
new recording command.
z If, with the recording session paused, you have
uploaded a menu setting file or a power failure has
occurred, the DVR does not resume the previous
recording status.
occurred, the DVR does not resume the previous
recording status.
The following changes have been added to the “MON.2
DISPLAY” item on the <ALARM OPERATION SET> screen
under “RECORD SET”.
DISPLAY” item on the <ALARM OPERATION SET> screen
under “RECORD SET”.
[Settings] (
indicates default setting)
Forcible Interruption of Recording (P58)
<--> <MAIN MENU>
1.INITIAL SET
->
2.RECORD SET ->
3.GENERAL SET ->
4.SCREEN SET ->
5.POWER LOSS/USED TIME ->
6.INITIALIZATION LOG ->
7.COPY MENU SETTINGS ->
8.ADVANCED MENU SET ->
MOVE:JOG SELECT:SHUTTLE
While the recording session is paused,
a <--> mark is displayed on the menu screen.
a <--> mark is displayed on the menu screen.
Changes to the Display of Monitor 2 upon
Alarm Detection (P104)
Alarm Detection (P104)
Setting
Description
NC
When an alarm is detected, the main monitor
does not change.
does not change.
SWITCH
(added)
(added)
When a number of alarms occur, the display
switches between the video from the
corresponding cameras, showing each for one
second.
switches between the video from the
corresponding cameras, showing each for one
second.
9
When an alarm is detected, the main monitor
appears in multi 9 screen display.
appears in multi 9 screen display.
16
When an alarm is detected, the main monitor
appears in multi 16 screen display.
appears in multi 16 screen display.
LAST
(added)
(added)
When a number of alarms occur, the most recent
alarm video is given priority and is displayed.
alarm video is given priority and is displayed.
FIRST
(added)
(added)
When a number of alarms occur, only the video
for the first alarm is displayed. However, if the
duration for the first alarm expires, video for the
next alarm is displayed.
for the first alarm is displayed. However, if the
duration for the first alarm expires, video for the
next alarm is displayed.
<ALARM OPERATION SET>
ALARM RETRIGGER : ON
MAIN MON. DISPLAY : FULL
ALARM PRIORITY : LAST
MON.2 DISPLAY : NC
ALARM PRIORITY : LAST
MON.2 DISPLAY : NC
(Settings changed)