Sanyo R227 User Manual

5. Turn the knob until the display says <Set Time>.

6. Before setting Time and Date, you need to choose the correct time zone. There are 7 time 

zones to choose.

7. After setting the time zone, you need to set the time. 
8. Press the SELECT button.

9. Turn the knob until the hour setting is correct, then press the SELECT button.

10.Turn the knob until the minute setting is correct, then press the SELECT button.

11.Then we can continue to set the date, month and year.

Finally, the display returns to the Set Time/Date mode.  

After  finished  setting,  when  the  unit  is  turned  on,  the  time  information  will  always  show  on 
bottom  right  hand  corner  of  the  display.    When  the  unit  power  is  off,  the  time  information  will 
show in the middle of the display at its maximum size.

Setting Sleep Timer

Selecting this option will enable the radio to switch itself off after a set period.
1.  Press  the  Sleep  button,  the  display  will  show  “Sleep  Timer  15  minutes”  and  the  radio  will 

continue to play as normal for 15 minutes and go into standby mode automatically.

2.  To  increase  the  amount  of  time  that  the  radio  will  play  before  shutting  off,  press  the  Sleep 

button again to change the display to the desired sleep time.  When Sleep button is pressed 
each time, the sleep timer prolongs 15 minutes, up to a maximum of 90 minutes.

3. To turn the radio on again, simply press the Standby button.

US-21