Sansui HDLCD4650 User Manual

EN 22

You can select from among the following items

and parameters.
Text Size:

Auto, Small, Standard, Large

Text Type:

Auto, Style1, Style2, Style3, Style4,

Style5, Style6, Style7

Text Edge: Auto, None, Raised, Depressed,

Uniform, Left Shadow, Right

Shadow

Text Color: Auto, Black, White, Red, Green,

Blue, Yellow, Magenta, Cyan

Text Opacity: Auto, Solid, Transparent,

Translucent, Flashing

Background

Color:

Auto, Black, White, Red, Green,

Blue, Yellow, Magenta, Cyan

Background

Opacity:

Auto, Solid, Transparent,

Translucent, Flashing

NOTE:

You cannot set both “Text Color” and “Background

Color” as a same color.

You cannot set both “Text Opacity” and “Background

Opacity” to “Transparent”.

Setting the picture size

You can change to a variety of picture sizes—

Natural, Cinema Wide1, Cinema Wide2, Cinema

Wide3, Full and Native.

Selecting the picture size

Select “Picture ⇒ Picture Size”, then press ▶ or

ENTER to display Picture Size menu.

Press ▲ or ▼ or corresponding Number buttons

(0-4) to select the desired picture size, as described

below.

Picture Size

1.Cinema Wide1

2.Cinema Wide2

0.Natural

4.Full

3.Cinema Wide3

NOTE:

Selectable picture sizes may vary depending on the

input source or broadcast signal.

Picture Size menu also can be displayed by

pressing PICTURE SIZE on the remote control.

•

Natural

In some cases, this image will display the size of

standard 4:3 with a black side bar.

•

Cinema Wide1 (for 4:3 format programs)

To fill the screen, the right and left edges are

extended, however; the center of the picture remains

near its former ratio.

The top and bottom edges of the picture may be hidden.

Cinema Wide2 (for letter box programs)

The entire picture is uniformly enlarged—it is

stretched the same amount both wider and taller

(retains its original proportion).
The top and bottom edges of the picture may be hidden.

Cinema Wide3 (for letter box programs with

subtitles)

To fill the width of the screen, it is extended

horizontally. However; it is only slightly extended at the

top and the bottom.
The top and bottom edges of the picture may be hidden.

A B C D E F G - - - - - - - - - - - - - - - -

A B C D E F G - - - - - - - - - - - - - - - - - - - - - - - - - -

Full (for 16:9 source programs)

Full will display the picture at the maximum size.

Native (for PC mode only)

Detects the resolution of the signal of the image and it

will be shown on the screen with same amount of pixels.

NOTE:

Some High Definition and/or Digital broadcasts may

not allow you to change the picture size.

In HDMI or COMPONENT mode with a scanning

rate of 720p, 1080i or 1080p (HDMI only) only the

Cinema Wide2 and Full picture size feature are

available.

In PC mode, only the Natural, Full and Native

picture size features are available. In PC mode

(WXGA, WXGA+, FHD), only the Full and Native

picture size features are available.

When the PC connected to the HDMI terminal and

1920x1080 resolution (FHD) is selected, the top

and bottom, right and left edges of the picture may

be hidden on all picture sizes.

•

J3KZ0121A_EnFr.indb 22

1/10/12 4:00:56 PM