SAM4S Cash Register ER-5115 User Manual
108
Programming
SAM4s ER-5115 Electronic Cash Register
System Option Programming
Refer to the “System Option Table” on page 109 to review the system options. Read each option
carefully to determine if you wish to make any changes.
carefully to determine if you wish to make any changes.
NOTE: Because after clearing memory all options settings are automatically set to 0, and
because your most likely option selections require a status setting of 0, you do not need to
program this section unless you wish to change the default status.
because your most likely option selections require a status setting of 0, you do not need to
program this section unless you wish to change the default status.
Programming a System Option:
1. Turn the control lock to the P position.
2. Enter
3 0, press the SBTL key.
3. Enter a system option address, press the X/TIME key.
4. Enter the number representing the status you have selected, or if there is more than one
decision to be made in an address, add the values representing your choices for each
decision and enter the sum. Press the SBTL key.
decision and enter the sum. Press the SBTL key.
5. Repeat from step 3 for each system option you wish to change.
6. Press
the
CASH
key to end system option programming.
System Option Flowchart
SBTL
X/TIME
Status
CASH
Repeat for each
System Option
Option #
SBTL
0
3