Salton SG8SS User Manual

1 To open, hold the unit vertically, gripping the cover in one hand, and 

the grinder in the other.

2 Turn the cover to move the pointer    from     to    .
3 Gently lift the cover off.

1 Fit 4 AA Alkaline batteries into the motor unit.
2 The polarities (+ and -) are marked on the battery compartment.

1 Lift the motor unit off the grinder.
2 Fill the grinder with peppercorns, sea salt, dried herbs or spices.
3 Don't overfill, or it won't fit together.
4 Align the pointers         on the bottom of the motor unit with

the padlocks          on the top of the grinder, and lower the motor 

unit on to the grinder.

5 The spindle should slide easily into the centre of the motor unit.
6 Lower the cover on to the motor unit.
7 Align the pointer   on the cover with the open padlock     ,  

push the cover down, then turn it to align the pointer    with the 
closed padlock     .

1 Turn the whole mill upside down, and turn the knob right (-) until it 

won't go any further.

2 Now turn it left (+) a little.
3 Turn the mill right way up, and press and release the switch.
4 Check the grind size, and adjust till it's the way you want it.
5 Don't turn it more than 6 complete turns towards +, or you may 

unscrew the knob from the spindle.

6 Set the base down and sit the mill on the base.

Your product may vary slightly 
from illustration.

When using this appliance, basic safety precautions should always be 
followed including the following:

READ ALL INSTRUCTIONS BEFORE USING

1 Do not immerse the unit in water or any liquid.
2 Do not mix old and new batteries.
3 Avoid contacting moving parts.
4  The use of attachments not recommended or sold by the manufacturer    

may cause injury.

5  Remove the batteries and store in a dry, cool place when not in use.
6 Don't run the motor for more than 1 minute, or it may overheat. After 

1 minute, switch off for at least 3 minutes, to let the motor cool.

7 Don't use the appliance for any purposes other than those described in 

these instructions.

8 Don't run the appliance empty, it may overheat.
9 Don't use the appliance if it's damaged or malfunctions.

THIS PRODUCT IS FOR HOUSEHOLD USE ONLY.

THIS IS NOT A TOY

Wipe the outside of the mills with a clean dry cloth. Don't let them get
wet or damp, and don't use detergent.

1 Check that the batteries are fitted correctly - there's a guide inside the 

battery compartment.

2 Don't leave dead batteries in the appliance, they may leak over   

the product and surroundings.

3 Unless you're using the batteries regularly, it's best to remove 

them altogether.

4 When you need new batteries, change them all. Don't use new and used 

batteries together.

5 Don't use different kinds of batteries together.
6 Don't put old batteries in a fire or incinerator.
7 Don't try to recharge batteries unless they're specifically designed to 

be recharged.

1

2

Cover P/N 71203
Motor Unit P/N 71204
Grinder P/N 71205
Base P/N 71206

Salton_SG8SS_IB_19-5-06  5/19/06  3:30 PM  Page 3