Samson AH1 QV10e Leaflet
WIRELESS FITNESS SYSTEM
CR77 ARCHITECT’S & ENGINEER’S SPECIFICATIONS
The CR77 from Samson shall be a UHF true diversity
wireless audio receiver to be used with any of our Airline
wireless transmitters. The CR77 shall be a ½ rackspace
receiver that can also be used as a stand-alone receiver.
The CR77 is supplied with a 12Volt DC power supply.
The CR77 shall have a front panel level control, squelch
control, power switch, antenna A and B, and 6 segment
audio and RF metering. The rear panel of the CR77 shall
have balanced XLR and ¼ inch unbalanced outputs with
mic/line level switching. The CR77 shall operate in the
801-805mHz.
wireless audio receiver to be used with any of our Airline
wireless transmitters. The CR77 shall be a ½ rackspace
receiver that can also be used as a stand-alone receiver.
The CR77 is supplied with a 12Volt DC power supply.
The CR77 shall have a front panel level control, squelch
control, power switch, antenna A and B, and 6 segment
audio and RF metering. The rear panel of the CR77 shall
have balanced XLR and ¼ inch unbalanced outputs with
mic/line level switching. The CR77 shall operate in the
801-805mHz.
PRODUCT SPECIFICATION SHEET
SERIES
DESCRIPTION
CATEGORY
AIRLINE
CR77 WITH AH1 QV10e
WIRELESS
CR77 SPECIFICATIONS
Frequency Response ......................... 50 Hz - 15 kHz (±3 dB overall)
Receiving Frequency Range ............... 801 – 805 MHz or 863 –
Receiving Frequency Range ............... 801 – 805 MHz or 863 –
865 MHz
Sensitivity....................................... 18 dBm (@ THD 2%)
T.H.D. (Overall) ................................ 1% Max (@AF 1 kHz,
T.H.D. (Overall) ................................ 1% Max (@AF 1 kHz,
RF 46 dBu)
S/N Ratio (Overall) ........................... 90 dB (with IHF-A Filter)
Dimensions (W × D × H) .................... 8.5˝ × 4.55˝ × 1.69˝
Dimensions (W × D × H) .................... 8.5˝ × 4.55˝ × 1.69˝
216mm × 115.75mm × 43mm
1.69”
4”
.92”
2.6”
8.5”
ARCHITECT’S & ENGINEER’S SPECIFICATIONS
The AH1 with QV10e is a UHF wireless headset specifically
designed for the fitness industry. The AH1 shall be a UHF wireless
transmitter that fits on to the QV10e headset for a no beltpack
design. The AH1 has a power on/off switch and mute switch. The
AH1 has a mic gain control inside the battery door. It operates
on a single AAA battery and gets about 14 hours battery life. The
AH1 operates in the 800mHz range. The QV10e headset uses
our cardioid QV mic element. The element and headset are water
resistant making it an ideal choice for the fitness industry.
designed for the fitness industry. The AH1 shall be a UHF wireless
transmitter that fits on to the QV10e headset for a no beltpack
design. The AH1 has a power on/off switch and mute switch. The
AH1 has a mic gain control inside the battery door. It operates
on a single AAA battery and gets about 14 hours battery life. The
AH1 operates in the 800mHz range. The QV10e headset uses
our cardioid QV mic element. The element and headset are water
resistant making it an ideal choice for the fitness industry.
+
_
1.4”
.9”
2.4”
+
_
1.4”
.9”
2.4”
AH1 QV10e SPECIFICATIONS
Generating Element .......................... Back Electret condenser
Polar Pattern ................................... Bidirectional noise cancelling
Mounting system ............................. Adjustable headband
Polar Pattern ................................... Bidirectional noise cancelling
Mounting system ............................. Adjustable headband
and gooseneck
Sensitivity ...................................... 80 mV@114 dB SPL
Max.SPL ......................................... 145 dB
Weight....... ..................................... 1.92 oz • 54.4 g
Max.SPL ......................................... 145 dB
Weight....... ..................................... 1.92 oz • 54.4 g