Sagem SAGEM F@stTM 1000 N56815740110 User Manual
3 - Installing the SAGEM F@st
TM
1000 modem
User Guide - N56815740110
No r
eproduction or communication without the written consent of SAGEM SA
Page 3-17
3.3 Installing for Windows 2000 professional
For Windows 2000 professional, the installation of the SAGEM F@st
TM
1000 modem is carried out
according to the following process :
!
Installing the modem drivers,
!
Configuring the ATM settings.
3.3.1 Installing
the
modem
!
Switch off the modem if it is powered by unplugging the power supply cable either on the modem
side (connector marked PWR), or on the mains side.
!
Switch on the PC and wait for the complete start-up of Windows 2000.
!
Insert the installation CD-ROM; the home page appears after a few seconds.
If this screen does not appear automatically proceed as follows:
From the Start menu select Run then enter <Drive letter for the CD-ROM>:\English\Setup.exe.
!
Select
Modem setup on this page.
The install program copies the files to the PC's hard drive, then displays the following message:
!
Click
OK and connect the modem to the PC with the USB cable, and to the telephone line (ADSL)
with the line cable.
!
Connect the power supply cable to the modem (connector marked PWR), then connect the mains
adapter to power up the SAGEM F@st
TM
1000.
Windows installs the drivers then displays the following message: