Russound ST2S User Manual

Press Select 

button to select

Sirius Tuner

MEM

NAME

Procedure

BANK

NAME

Procedure

Sirius
Setup
Menu

FACTORY

INIT

Procedure

CONTROLLR

ID

Procedure

SYSTEM

INFO

Procedure

DIAGNOSTICS

Procedure

This 

Procedure

returns the 

ST2 Tuner

to its 

Factory 

settings

Please

Wait

Cycle Power

YES

SOURCE

NUM

Procedure

FACTORY

INIT

Procedure

UPDATE

FIRMW

Procedure

SYSTEM

INFO

Procedure

TUNER
SETUP

Menu

Chassis
Setup
Menu

This 

Procedure

is for

Factory

use

ONLY

Are you 

sure?

Yes or No

NO

All Contrlrs

4. Press MODE/BAND to enter the FACTORY INIT
menu.
5. “Are you sure” appears on the tuner. Using the
Tune Up/Down buttons, view the “Yes” and “No”
selections.
6. Press MODE/BAND to select. A “No” selection
returns to the top of the Factory Init menu. A
“Yes” begins the initialization.
7. “Please wait” appears on the tuner during the
process and “Cycle Power” appears when com-
plete.
8. Cycle power on the ST2S tuner.

The System Info menu shows the SIRIUS module

manufacturing build properties.

1. Enter the Setup Menu by pressing and holding
the SELECT button.
2. TUNER SETUP appears. Press MEM Up/Down
until SYSTEM INFO appears on the tuner.
3. Press MODE/BAND. 
4. Press MODE/BAND at “Build Time” to view.
5. Press MEM Up/Down to advance.
6. Press MODE/BAND at “Build Date” to view.
7. Press MEM Up/Down to advance.
8. Press MODE/BAND at “Version” to view.
9. Press SELECT to exit the System Info menu.

33