Rhino Mounts RHINO TW144 User Manual

TW144   01/11

Operation Section 4-46

© 2011 Alamo Group Inc.

Uneven Cut

Excessive ground speed.

Reduce ground speed.

Blades worn, dull, or bent.

Replace blades.
(Refer to “Maintenance” section).

Mower not level side to side.

Adjust. (Refer to “Assembly” section)

Improper height adjustment.

Adjust Mower height. 
(Refer to “Assembly” section)

Low tractor tire pressure on

Adjust tire pressure.

one side

(Refer to your tractor 
operator's manual)

Turning too fast.

Reduce ground speed when turning.

Tractor tires push grass down.

Adjust your tractor wheel spacing. 
(Refer to “Operation” section)

Damaged Mower pan.

Repair or replace as necessary.

Uncut Material

Excessive ground speed

Reduce ground speed.

RPM too low

Use full PTO speed. (Refer to your
tractor operator's manual)

Improper blade for direction of cut.

Install blades so rotation is correct.

Poor Shredding

Excessive ground speed.

Raise the front of Mower relative to the

rear to hold and circulate material 
longer. (Refer to the “Operation 
Section-Setting the Mower-Setting 
Deck Height”) Reduce ground speed.

Cutting too high.

Lower cutting height. (Refer to the
“Operation Section-Setting the Mower-
Setting Deck Pitch”)

Windrowing 

Material heavy and lush.

Raise the front of Mower relative to the

or Uneven

rear. (Refer to the “Operation Section
Setting the mower-Setting Deck 

Height”)

Excessive ground speed

Reduce ground speed.

Conditions too wet.

Wait for conditions to dry. Reduce
ground speed.