Ridgid Digital Inspection Camera microEXPLORER User Manual

13

Pressing the trash can button      while on an
image will bring up a text box asking you if
you are sure you want to delete the image. If
you want to delete the image, highlight the
check mark      , and press select. If you do
not want to delete the image, highlight the

, and press select.

Entering the Secondary Settings Screen
While in the Primary Settings Screen, use
the arrow keys to highlight the menu icon

and press select      .

There are three setting categories to choose
from 

(Figure 18) while in the secondary set-

tings screen; camera, playback and tools.
Use the right and left arrow keys to switch
from one category to the next. The selected

category will be highlighted with a bright silver
background. Once the desired category is
reached, press select      .

You will notice the up and down arrows on the
screen switch from gray to red. The red ar-
rows indicate you can now scroll through the
different settings. Use the up and down arrows
to switch between settings. Once on a setting,
use the right and left arrows to turn a setting
on or off or adjust to the required level. Press-
ing back       at any point will bring you back to
the primary settings screen and pressing it
again will return you to the live screen.

1. Use the USB cable to connect the

microEXPLORER inspection camera to
the computer as shown in 

Figure 19.

2. Place the small side of the USB cable

into the mini USB port in the micro-
EXPLORER inspection camera 

(Figure

7), and the larger end into an open USB
port in your computer.

3. Turn the microEXPLORER inspection

camera’s power ON.

4. A splash screen saying “USB Connected”

will appear on the microEXPLORER in-
spection camera’s screen.

5. The following screen will be displayed

on your computer. Select “Copy pictures
to a folder on my computer” and click
OK.