Ricoh IS300e User Manual
109
4. Setting Originals
This chapter describes how to set an original to be scanned with this machine
It is possible to set an original on the exposure glass or the ADF. To scan several
pages successively, the ADF is convenient.
It is possible to set an original on the exposure glass or the ADF. To scan several
pages successively, the ADF is convenient.
Sizes and Weights of recommended
Originals
Originals
Note
❒ To scan an original which siza is A5 or smaller, or which weight is 52g/m
2
or
lighter from the ADF using a network TWAIN driver, set [Location] to “ADF
(thin paper)” on the application software you use the network TWAIN driver.
For details, see the network TWAIN driver help.
(thin paper)” on the application software you use the network TWAIN driver.
For details, see the network TWAIN driver help.
❒ When you perform a Send Scan (e-mail, Send File (SMB/FTP) or Delivery
Server) or a Print Scan operation using the ADF, set [ADF Thin Paper] to “ On ”
if the originals to be scanned are 52g/m
if the originals to be scanned are 52g/m
2
(45kg) or thinner, or A5 size or small-
er.
Where original is
set
Original size
Original weight
Exposure glass
Up to A3(297mm
×420mm)
Up to 11
″×17″
ADF
One
side
side
❖
❖
❖
❖ Standard size
Maximum : A3,
S, 11″×17″ S
Minimum : A5
″ S
❖
❖
❖
❖ Non-standard size
Maximum: 297 mm x 2000 mm
(when scanning in binary),
297 mm x 630 mm (when scan-
ning in colour or gray scale)
Minimum: 105 mm x 128 mm
(when scanning in binary),
297 mm x 630 mm (when scan-
ning in colour or gray scale)
Minimum: 105 mm x 128 mm
41-128g/m
2
Both
sides
sides
52-105g/m
2