Ricoh IS300e User Manual

Connecting to a Power Source

Connecting to a Power Source

This section explains how to connect
this machine to a power source, using
the bundled AC power cord.

R WARNING:

R CAUTION:

AAAA

Confirm that the power switch is
set to off.

BBBB

Confirm that the lock switch lo-
cated on the left side of the ma-
chine is set to the “U nloc k”
position.

Important

❒ Be sure to set the lock switch to

“Unlock”. Turning on the pow-
er with the lock switch set to
“Lock” could result in failure in
scanning or malfunction of this
machine.

CCCC

Push the power cord plug all the
way into the power connector on
this machine.

Note

❒ Be sure to use the power cord

that comes with this machine.

DDDD

Insert the power plug into the
power outlet.

• Do not use with a power source with a

voltage different from the specified volt-
age. Do not use a power outlet with mul-
tiple devices plugged in. These could
create the risk of fire or electric shock.

• Avoid the use of an extension cord.

• Do not damage, break, twist or modify

the Power Cord. Placing heavy objects
on the cord, pulling on or bending it ex-
cessively can damage the Power Cord,
creating the risk of fire or electric shock.

• Never touch or unplug the power plug

with wet hands. This can create the risk
of electric shock.

• When unplugging from an outlet, be

sure to grasp the plug when pulling.
Never pull on the cord. This could dam-
age the cord creating the risk of fire or
electrical shock.

ZDLH350

ADG024S