Ricoh IS300e User Manual
Registering Scan Settings
71
3
❒ When you select [Custom Resolu-
tion]
, you can specify the resolu-
tion within the range of 100dpi
through 1200dpi in 1dpi incre-
ments.
through 1200dpi in 1dpi incre-
ments.
❖
❖
❖
❖ Scan Size
This item lets you select the size of
the area to be scanned. You can se-
lect from the following options.
Auto Detect, A3
the area to be scanned. You can se-
lect from the following options.
Auto Detect, A3
S, A4S, A4R,
A5
S, A5R, 11x17S, 8
1
/
2
x14
S,
8
1
/
2
x 1 3
S , 8
1
/
2
x 1 1
R S ,
8
1
/
2
x 1 1
S , 5
1
/
2
x 8
1
/
2
R ,
5
1
/
2
x8
1
/
2
S, B4JIS (Japanese In-
dustrial Standard)
S, B5JISS,
B5JIS
R, Custom Area Setting
Note
❒ Original sizes that can be auto-
detected vary depending on
where you place the originals
(on the exposure glass or on the
ADF). See
where you place the originals
(on the exposure glass or on the
ADF). See
nal Sizes Available for Auto De-
tection” for details.
tection” for details.
❒ When [Custom Area Setting] is se-
lected, specify the scanning area
for [Start Positn.] and [Scanning
Area]
for [Start Positn.] and [Scanning
Area]
.
❖
❖
❖
❖ Position
Specify the position where scan-
ning starts when [Custom Area Set-
ting]
ning starts when [Custom Area Set-
ting]
is selected in the [Scan Size]
list.
Enter the offset from the reference
(start) point in millimeters or inch-
es.
Enter the offset from the reference
(start) point in millimeters or inch-
es.
Note
❒ This setting is enabled only
when [Custom Area Setting] is se-
lected in the [Scan Size] list.
lected in the [Scan Size] list.
❒ You can select millimeters or
inches to specify the position
using [Unit of Measure] in [2.Send-
Scan Settings]
using [Unit of Measure] in [2.Send-
Scan Settings]
under the Scanner
Features menu. See
❖
❖
❖
❖ Scanning Area
Specify the position where scan-
ning ends when [Custom Area Set-
ting]
ning ends when [Custom Area Set-
ting]
is selected in the [Scan Size]
list.
Enter the offset from the position
specified for [Start Positn.], in mil-
limeters or inches.
Enter the offset from the position
specified for [Start Positn.], in mil-
limeters or inches.
Note
❒ This setting is enabled only
when [Custom Area Setting] is se-
lected in the [Scan Size] list.
lected in the [Scan Size] list.
❒ You can select millimeters or
inches to specify the position
using [Unit of Measure] in [2.Send-
Scan Settings]
using [Unit of Measure] in [2.Send-
Scan Settings]
under the Scanner
Features menu. See p.61 “Unit
of Measure” for details.
of Measure” for details.
❒ Make sure that you specify ver-
tical/horizontal positions and
scanning areas to be within the
available scan area. The availa-
ble scan area varies depending
on where you place the origi-
nals (on the exposure glass or
on the ADF).
scanning areas to be within the
available scan area. The availa-
ble scan area varies depending
on where you place the origi-
nals (on the exposure glass or
on the ADF).