Rimage 110716-000 User Manual

When selected, the Rimage Raster Masker displays allowing you to adjust the mask (non-

printable area) settings for the selected media type (

 only).  This 

works well when printing rectangle or square pictures on the disc and you do not want the 

edges printed. If you print on the edges of a disc where there is not printable surface, the ink 

will smear or run. 

 

 let you adjust the standard outer and inner diameter settings, etc. 

 let you select the 

 feature and adjust the related outer and inner 

diameter settings. 

 lets you switch between a unit of measure of times 1.0 mm or times 0.1 mm. 

The maintenance section allows you to select alignment functions, diagnostics, or update the flash. 

 

Center Image  –

 

The Center Image function is only required if the printed image is not 

centered on the label. Directions are found on the next page. 
Align Cartridges – directions are found on page 

Diagnostics – directions are found on page 

Update Loader Flash – Rimage recommends using the Production Server to update the 

autoloader flash firmware. Refer to page 

Clean Cartridges – 

Cleans the ink jet nozzles when the jets are dried out.

 Refer to page