Revolabs 10-FLX2-200-VOIP 10-FLX2-020-VOIP 10-FLX2-002-VOIP 10-FLX2-101-VOIP User Manual
71
Battery Exchange
The rechargeable batteries in the different FLX components can all be exchanged.
Please note that only Revolabs approved batteries should be used for the replacement.
The following sections explain how to change the batteries in the different components.
Please note that only Revolabs approved batteries should be used for the replacement.
The following sections explain how to change the batteries in the different components.
We recommend charging any component for 8 hours after exchanging the battery.
Microphones
To exchange a microphone battery push the bottom part of the back cover slightly down
towards the charger port and then lift it as shown in the illustration below.
towards the charger port and then lift it as shown in the illustration below.
Carefully take the battery out of the plastic cover. Put the new battery into the back
cover as shown in the figure below. Press on the battery until it snaps into the back of
the microphone housing.
cover as shown in the figure below. Press on the battery until it snaps into the back of
the microphone housing.
Slide the back of the microphone back in place. Place the microphone back into the
charger base. The LED should go on indicating the charge status of the microphone.
charger base. The LED should go on indicating the charge status of the microphone.
Dialer
The battery in the dialer can be exchanged after the dialer’s back was
opened. The back of the dialer opens if pressure is applied, pushing the
back up away from the charger port and lift it, as shown in the picture.
opened. The back of the dialer opens if pressure is applied, pushing the
back up away from the charger port and lift it, as shown in the picture.