Remeha Avanta Plus Hot Water Cylinder Brochure

Page of 9
REMEHA  HOT  WATER  CYLINDERS    
WARRANTY
NOTES  PAGE
14
15
NOTES
WARRANTY
Remeha Commercial guarantees the water heater cylinder against faulty manufacture or materials for a period of 
two years from the date of purchase including parts and labour. This two year guarantee is extended to five years 
for the cold water control valve and to 25 years (from the date of installation) for the stainless steel inner vessel.
These guarantees are valid provided that:
•  The water heater has been installed by a competent 
engineer and as per the instructions contained in the 
installation manual and all relevant Codes of Practice 
and Regulations in force at the time of installation
•  Any disinfection has been carried out in accordance with  
BS 6700
•  Should the factory fitted temperature and pressure 
relief valve be tampered with or removed your guarantee 
will be invalidated
•  The water heater has not been modified in anyway other 
than by Remeha approved engineers
•  The water heater has only been used for the storage of 
wholesome sanitary water (max 250mg/l chloride)
•  Only stainless steel dummy plugs are to be used
•  The water heater has not been subjected to excessive 
pressure beyond the guidelines detailed in the 
installation instructions
•  The water heater has not been subjected to frost, nor has it 
been tampered with or been subject to misuse or neglect
•  No factory fitted parts have been removed for unauthorised 
repair or replacement
•  Regular maintenance has been carried out by a 
competent person in accordance with the requirements  
set in the maintenance section of the installation 
manual and any replacement parts used should be 
approved spare parts
•  The guarantee is not valid outside of the United Kingdom
The warranty does NOT cover:
Consequential damages or profit loss which may arise from a defect.
Warranty claims have no delaying effect on the payment dates and other demands.
Your Remeha warranty covers you for an equivalent replacement and labour in the event that the unit fails 
prematurely as a result of a proved manufacturing defect.
In order that this can be achieved, full access for removal and replacement of the unit is essential. If it is found that 
access can not be achieved the warranty will be limited to the replacement of the unit only and subsequent labour 
charges would not be met under the warranty.