Rangemaster 90 CERAMIC U109650-02 User Manual

Page of 36
17
Glide-out™ Grill
Before you remove any of the grill parts for 
cleaning make sure that they are cool.
The grill pan and grid should be washed in hot 
soapy water. After grilling meats or any foods that 
soil, leave to soak for a few minutes in the sink 
immediately after use. Stubborn particles may be 
removed from the grid by using a nylon brush. 
Alternatively the grill pan can be washed in a dish 
washer.
To remove the grill pan support frame, pull the grill 
pan forward.
Lift the grill pan clear of the support frame.
 
The support frame is held to the side rails by two 
clips on each side.
For each side, support the side rail with one hand 
and with the other hand lift the frame up and out of 
the side clips. 
For safety, push the side rails back into the grill 
chamber. 
The side rails can be 
removed to make 
cleaning the grill 
chamber easer by 
unhooking them from 
the grill chamber sides. 
Slides can be wiped clean with soft cloth and mild 
detergent.
Do not use any abrasive substance.
DO NOT put the side runners in a dishwasher
When you have finished, hook the side rails back 
onto the sides of the chamber. To refit the frame 
pull the side rails forward and for each side in turn 
support the side rail and press the frame down into 
the side rails. Replace the grill pan.
Control Panel and Doors
Avoid using any abrasive cleaners including 
cream cleaners, e.g. Cif, on brushed Stainless Steel 
surfaces. For best results use a liquid detergent e.g. 
Domestos Multi Surface Cleaner.
The control panel and control knobs should only 
be cleaned with a soft cloth wrung out in clean hot 
soapy water. Wipe with a clean dampened cloth 
then polish with a dry cloth. The oven doors should 
only be cleaned with a soft cloth wrung out in clean 
hot soapy water.