Psion Teklogix 8100107B User Manual

Conv. UPC-E1 To UPC-A

This parameter converts UPC-E1 (zero suppressed) decoded data to UPC-A format 
before transmission. After conversion, data follows UPC-A format and is affected 
by UPC-A programming selections (e.g., Preamble, Check Digit).

Prefix/Suffix

Refer to page 149 for details.

6.25.1.11 UPC/EAN Shared Settings

The parameters you set here are a shared across all available UPC and EAN 
bar codes. 

Enable Bookland EAN

Setting this parameter to on allows your scanner to recognize “Bookland EAN” 
bar codes.

Supplementals

'Supplementals” are additionally appended characters (2 or 5).
Double-tapping this parameter displays a list of options. If Ignore is chosen, 
UPC/EAN is decoded and the supplemental characters are ignored. If Decode is 
chosen, UPC/EAN symbols are decoded with supplementals. Autodiscriminate 
works in conjunction with the Supp. Redundancy parameter.

Supp. Redundancy

With Autodiscriminate selected in the Supplementals parameter, “Supp. 
Redundancy” adjusts the number of times a symbol without supplementals is 
decoded before transmission. 
When you double-tap on this parameter, a dialog box is displayed in which you can 
enter a value between 2 and 20. A value of 5 or above is recommended when 
Autodiscriminate is selected and you are decoding a mix of UPC/EAN symbols with 
and without supplementals.