Psion Teklogix 8100107B User Manual

Low Power Timeout

To extend laser life, you can select the length of time the scanner remains active 
following a successful decode. The scanner wakes from low power mode when a 
bar code is scanned – a successful decode restores normal blinking.
When you double-tap on this parameter, a dialog box is displayed in which you can 
choose a value of 30 sec, 1 min, 2 min or 3 min.

Parameter Scanning

Setting this parameter to Enabled allows decoding of parameter bar codes.

Same Read Validate

The data is only transmitted after repeated reads give the same result. The 
value assigned at this parameter determines the number of reads required, from 
0 to 10 times. 

Same Read Timeout

Prevents the same bar code from being read more than once. The value assigned 
determines after what time period the scanner will timeout, from 0 to 2550 msec. 

Diff Read Timeout

Prevents unwanted reading of other bar codes on the same label. The value assigned 
determines after what time period the scanner will timeout, from 0 to 2550 msec. 

6.25.3.3

Code 39

Enable

Setting this parameter to on enables “Code 39”.

Full ASCII

If this parameter is enabled, the characters +, %, and / are used as escape 
characters. The combination of an escape character and the next character 
is converted to an equivalent ASCII character.