Psion Teklogix 8100107B User Manual

Set Length L1, Set Length L2, And Set Length L3

Lengths for “Codabar” can be set from 0 to 255. The length of a code refers to the 
number of characters (i.e., human readable characters), including check digit(s). 
Double-tapping on these parameters displays dialog boxes where you can define the 
code length that will be recognized by your scanner.

Length Mode

You can choose to set L1 as Minimum Length or L1,L2,L3 as Fixed Length.

Field Size/Char

Refer to page 148 for details.

6.25.3.12 MSI Plessey

Enabled

Set this parameter to on to enable “MSI”.

Enable Plessy

Set this parameter to on to enable “Plessy”.

Check Digit Verification

The available options for this parameter are MOD 10 Check and Double MOD 10 
Check. This parameter uses the specified algorithm of the option you've chosen to 
ensure the integrity of the symbol data before transmitting. If the data does not 
contain that algorithm, the data is not transmitted. 

Transmit Check Digit

If the check digit is to be transmitted with the data, this parameter must be enabled.

Plessy Transmit Check Digit

If the check digit is to be transmitted with the Plessy data, this parameter must 
be enabled.

Minimum Length

Minimum lengths for the bar code can be set from 0 to 255. The length of a code 
refers to the number of characters (i.e., human readable characters), including 
check digit(s).