Psion Teklogix 8100107B User Manual
Chapter 3: Getting To Know The WORKABOUT PRO
Storing Batteries
Storing Batteries
40
WORKABOUT PRO Hand-Held Computer With Windows Mobile 5.0 User Manual
•
The hand-held is ‘event’ driven—that is, when the unit is not in use, it
reverts to sleep mode (even when it appears to be running), saving battery
power. Events include a key press, touchscreen taps and scan triggers.
Power consumption is reduced if you avoid unnecessary events, and allow
the unit to sleep as much as possible.
reverts to sleep mode (even when it appears to be running), saving battery
power. Events include a key press, touchscreen taps and scan triggers.
Power consumption is reduced if you avoid unnecessary events, and allow
the unit to sleep as much as possible.
•
The battery is a ‘smart battery’ with built-in intelligence.
Tapping on the Power icon under Start>Settings>System tab displays a
dialog box that provides detailed information about the battery status of the
main and backup batteries installed in your unit.
Tapping on the Power icon under Start>Settings>System tab displays a
dialog box that provides detailed information about the battery status of the
main and backup batteries installed in your unit.
•
When the hand-held is switched off, it goes into a low-power, suspend state
but continues to draw a small amount of power from the battery. This
should not be an issue unless the unit is left in suspend state for more than a
week—for long-term storage, the battery should be removed from the unit.
but continues to draw a small amount of power from the battery. This
should not be an issue unless the unit is left in suspend state for more than a
week—for long-term storage, the battery should be removed from the unit.
3.8.1 Storing Batteries
Long term battery storage is not recommended. If storage is necessary:
•
Always try to use a ‘first-in first-out’ approach to minimize storage time.
•
Lithium Ion batteries age much faster at elevated temperatures. Store batter-
ies at temperatures between 0° C and 20° C.
ies at temperatures between 0° C and 20° C.
•
Always charge batteries to at least 40 to 60% before storing them. Batteries
can be damaged by an over-discharge phenomenon that occurs when an
empty battery is stored for a long period of time such that the cell voltage
drops below a lower limit.
can be damaged by an over-discharge phenomenon that occurs when an
empty battery is stored for a long period of time such that the cell voltage
drops below a lower limit.
•
To minimize storage degradation, recharge stored batteries to 40 to 60%
every 4 or 6 months to prevent over-discharge damage.
every 4 or 6 months to prevent over-discharge damage.
•
A ‘never used’ Li-Ion battery that has been stored for 3 years may have
limited or no useful life remaining once put into service. Think of batteries
as perishable goods.
limited or no useful life remaining once put into service. Think of batteries
as perishable goods.
3.9 Uploading Data In A Docking Station
Important:
Review the documentation provided with the user application installed
in your WORKABOUT PRO before performing data uploads.
in your WORKABOUT PRO before performing data uploads.
The desktop docking station and quad docking station allow the WORKABOUT
PRO to link to an Ethernet network. They are typically used to upload transaction
data to a server computer when a radio link is not available.
PRO to link to an Ethernet network. They are typically used to upload transaction
data to a server computer when a radio link is not available.
Note: Refer to “Chargers And Docking Stations” on page 305 for more details.