Psion Teklogix Schnellstart- Anleitung 7525 User Manual

Chapter 5: Connecting To A LAN With 802.11b
Entering New Settings

Psion Teklogix WORKABOUT PRO With Windows Mobile 2003 SE User Manual

Note: To change network settings, tap the stylus on a network. If the network for

which you are looking is not listed, tap on ‘Add new...’ and follow the
instructions on the screen.

2. In the Networks to access drop-down menu, choose All Available,

Only access points or Only computer-to-computer depending on the
type of network(s) to which you connect.

3. To connect only to networks you have already configured, disable the

checkbox next to Automatically connect to non-preferred networks.

Note: If you choose to automatically connect to non-preferred networks, your

WORKABOUT PRO will detect any new networks and provide the
screens necessary to configure them.

5.2.1 Entering New Settings

A wireless network can be added manually or it can be added automatically when
the network is detected.

Note: If the network is automatically detected. you can skip step 1 and step 2.

1. To manually enter new settings, tap on Start, Settings. Tap on the Con-

nections tab.

2. Tap on the Network Cards icon. In the Wireless tab, tap on Add new.

3. In the General tab, type a network name. If a network was detected, the

network name is automatically entered and cannot be changed.

4. In the Connects to drop-down menu, choose what your network will

use to connect

–

Work or Internet.

5. To use an ad-hoc connection, enable This is a device-to-computer

(ad-hoc) connection.

6. Tap on OK to save your changes.