Psion Teklogix Schnellstart- Anleitung 7525 User Manual
Chapter 6: Settings
Ending A Connection
Ending A Connection
170
Psion Teklogix WORKABOUT PRO With Windows Mobile 2003 SE User Manual
6.24.5 Ending A Connection
•
When connected through a modem or VPN connection, tap on the connec-
tivity icon
tivity icon
–
–
in the menu bar, and then tap on Disconnect.
•
When connected with a cable or cradle, detach the cable from your WORK-
BOUT PRO.
BOUT PRO.
•
When connected through a network (Ethernet) card, remove the card from
the WORKABOUT PRO.
the WORKABOUT PRO.
6.24.6 Proxy Server Setup
Note: If you are connected to your ISP or private network during synchroniza-
tion, the WORKABOUT PRO will download the appropriate settings dur-
ing synchronization from your PC. If these settings are not on your PC, or
if they need to be changed, you’ll need to set up the proxy server connec-
tion manually.
ing synchronization from your PC. If these settings are not on your PC, or
if they need to be changed, you’ll need to set up the proxy server connec-
tion manually.
To set up the proxy server connection manually, you’ll need the following
information: proxy server name, server type, port, type of Socks protocol used and
the user name and password.
information: proxy server name, server type, port, type of Socks protocol used and
the user name and password.
1. Tap Start, Settings. Tap on the Connections tab followed by the Connec-
tions icon.
2. Under My Work Network, tap on Set up my proxy server.
Figure 6.75 Proxy Settings Tab
3. Add a checkmark next to This network connects to the Internet and This
network uses a proxy server to connect to the Internet.