Psion Teklogix NEO PX750 User Manual
Psion Teklogix NEO Hand-Held Computer User Manual
145
Chapter 5: Configuration
Decoded (Internal) Scanners
UPC E
Add/Remove Data
Refer to “Add/Remove Data” on page 142 for details.
Refer to “Add/Remove Data” on page 142 for details.
5.13.2.9 UPC E
Enable UPC-E
Set this parameter to on to allow “UPC E” bar code scans.
Set this parameter to on to allow “UPC E” bar code scans.
Enable UPC-E1
Set this parameter to on to allow “UPC-E1” (zero suppressed) bar code scans.
Set this parameter to on to allow “UPC-E1” (zero suppressed) bar code scans.
UPC-E And UPC-E1 Check Digit
If you enable one or both of these parameters, a check digit is included with the decoded bar
code data.
If you enable one or both of these parameters, a check digit is included with the decoded bar
code data.
UPC-E And UPC-E1 Preamble
When you double-tap on one of these parameters, a dialog box is displayed where you can
choose one of three options for lead-in characters for UPC-E and UPC-E1 symbols transmit-
ted to the host device:
System Char – system character transmitted with the data,
Country code and System Char – both the country code (“0” for USA) and system character
are transmitted with the data, or
None – no preamble is transmitted. The lead-in characters are considered part of the symbol.
When you double-tap on one of these parameters, a dialog box is displayed where you can
choose one of three options for lead-in characters for UPC-E and UPC-E1 symbols transmit-
ted to the host device:
System Char – system character transmitted with the data,
Country code and System Char – both the country code (“0” for USA) and system character
are transmitted with the data, or
None – no preamble is transmitted. The lead-in characters are considered part of the symbol.
Conv. UPC-E To UPC-A
This parameter converts UPC-E (zero suppressed) decoded data to UPC-A format before
transmission. After conversion, data follows UPC-A format and is affected by UPC-A pro-
gramming selections (e.g., Preamble, Check Digit).
This parameter converts UPC-E (zero suppressed) decoded data to UPC-A format before
transmission. After conversion, data follows UPC-A format and is affected by UPC-A pro-
gramming selections (e.g., Preamble, Check Digit).
Conv. UPC-E1 To UPC-A
This parameter converts UPC-E1 (zero suppressed) decoded data to UPC-A format before
transmission. After conversion, data follows UPC-A format and is affected by UPC-A pro-
gramming selections (e.g., Preamble, Check Digit).
This parameter converts UPC-E1 (zero suppressed) decoded data to UPC-A format before
transmission. After conversion, data follows UPC-A format and is affected by UPC-A pro-
gramming selections (e.g., Preamble, Check Digit).
Add/Remove Data
Refer to “Add/Remove Data” on page 142 for details.
Refer to “Add/Remove Data” on page 142 for details.