Psion Teklogix Vehicle-Mount Computer 8525 G2 User Manual

The symbologies listed in the Barcodes tab change to reflect the scanner you choose and 
the bar codes it supports. Keep in mind that the items listed in the Barcodes tab are used 
to configure external, non-decoded scanners only. Decoded scanners cannot be 
configured using the symbologies listed under this tab. See “Decoded Scanners” below 
for information about these scanners.

5.5.13.2 Decoded Scanners

While non-decoded scanners are configured through the Scanner Properties dialog 
box (refer to “Non-Decoded Scanners” on page 138 for details), decoded scanners 
must be configured by scanning special configuration bar codes. In these cases, the 
scanner manufacturer provides programming manuals for configuration purposes.

•

For Symbol decoded scanners, refer to the LS3408 programming guide.

•

For PowerScan (PSC) decoded scanners, refer to the Powerscan Programing 
Guide (PSC).

5.5.13.3 Non-Decoded Scanners

All the available bar code symbologies for this type of scanner can be selected in 
this tab.
A ‘plus’ sign (+) to the left of the menu item indicates that a sub-menu of parameters 
is attached.

•

Tap the stylus on the + sign to display the sub-menu.

•

To change a parameter value, double-tap on the parameter. If you need to 
type a value, a dialog box is displayed in which you can type a new value.
If you need to change a yes or no value, double-tapping on the parameter 
toggles between yes and no.