Psion Teklogix Vehicle-Mount Computer 8525 G2 User Manual
Chapter 5: Configuration
Scanner Properties Setup
Scanner Properties Setup
146
Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual
Addendum
Important:
Before “Addendum” can take effect, the “Short Code” parameter
in the Options menu (see page 139) must be enabled (set to ‘ON’).
in the Options menu (see page 139) must be enabled (set to ‘ON’).
Refer to “Addendum” on page 144.
Prefix/Suffix Chars
5.5.13.9 UPC A Settings
Enabled
Set this parameter to on to enable UPC A or off to disable it.
Include Number Sys
If this parameter is enabled (set to on), the number system digit is included with the
decoded bar code data.
decoded bar code data.
Include Check
If this parameter is enabled (set to on), the check digit will be included with the
decoded bar code data.
decoded bar code data.
Addendum
Important:
Before “Addendum” can take effect, the “Short Code” parameter
in the Options menu (see page 139) must be enabled (set to ‘ON’).
in the Options menu (see page 139) must be enabled (set to ‘ON’).
Refer to “Addendum” on page 144.
Prefix/Suffix Chars
5.5.13.10 UPC E Settings
Enabled
Set this parameter to on to enable UPC E or off to disable it.