Psion Teklogix Vehicle-Mount Computer 8525 G2 User Manual

tion, the mount may slowly ‘settle’. Occasional readjustment and tightening 
of the handscrew may be required. Psion Teklogix offers a tightening tool 
(PN 9000594) which can be used to minimize settling (see Figure 6.5).

Figure 6.5 

The platform on which you secure the vehicle-mount must be strong 
enough to support 25 kg. Never attach the mount to a plastic dash or a 
wooden platform without the appropriate backing plate and bracing. In 
addition, you must provide operator access at the top, bottom and sides 
of the unit.

6.3.3.2

Installation

Figure 6.6 on page 173provides a diagram and a legend to help you attach the 

mounting bracket to the vehicle-mount and attach the RAM Vesa base.

1. Attaching the mounting bracket to the vehicle-mount: The kit pro-

vides four screws and washers that are used to secure the mounting 
bracket to the vehicle-mount. Place screw (D) through washer (C) and 
mounting bracket (B) and affix to the vehicle-mount (A). Torque to 
23 in-lbs. 

2. Attaching the RAM base to the mounting bracket: Apply Loctite 

243 to screw (G) threads. (Note that Loctite is not supplied by Psion 
Teklogix). Place screw (G) through washer (F), RAM Vesa base (E) 
and affix to mounting bracket (B), securing screws and washers in all 
four drilled holes. Torque to 26 in-lbs.