Psion Teklogix Vehicle-Mount Computer 8525 G2 User Manual
Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual
51
Chapter 3: Getting To Know The 8525/30 G2
Audio Indicators
Onscreen LEDs (8530 G2 Only)
When the 8530 G2 keyboard is removed, two onscreen-LEDs are displayed in the
taskbar. The LED to the left acts as the API indicator, and the LED to the right acts
as the TX/RX (transmit and receive) indicator.
These onscreen LEDs behave in the same way as those on the keyboard, changing
colour to indicate different operations. For details about LED behaviour, refer to
“RX/TX – Radio Traffic LED” and “API – User Application LED” on page 48.
taskbar. The LED to the left acts as the API indicator, and the LED to the right acts
as the TX/RX (transmit and receive) indicator.
These onscreen LEDs behave in the same way as those on the keyboard, changing
colour to indicate different operations. For details about LED behaviour, refer to
“RX/TX – Radio Traffic LED” and “API – User Application LED” on page 48.
Tethered Devices
When a peripheral is attached to the tether port and activated, an associated icon
appears in the taskbar.
appears in the taskbar.
3.6.4 Audio Indicators
Note: Care must be taken when routing cabling to the external port because
audio volume can be adversely affected if these cables block the beeper.
The 8525 G2/8530 G2 beeper provides a variety of sounds and can be configured to
emit a sound when a key is pressed, a keyboard character is rejected, scan input is
accepted or rejected or an operator’s entry does not match in a match field.
emit a sound when a key is pressed, a keyboard character is rejected, scan input is
accepted or rejected or an operator’s entry does not match in a match field.
Note: Refer to “Volume And Sound Properties” on page 96 for details about
the Volume & Sound Properties dialog box.
3.7 Scanning
Non-decoded scanners are configured using the Scanner Properties dialog box in the
Control Panel.
Control Panel.
Note: Refer to “Scanner Properties Setup” on page 137 for details.
Decoded scanners must be configured by scanning special configuration bar codes.
In these cases, the scanner manufacturer provides programming manuals for configura-
tion purposes.
In these cases, the scanner manufacturer provides programming manuals for configura-
tion purposes.
Scanner
RFID
Serial Device
USB Device