Proxim 7920 User Manual

5

You may follow the quick installation and configuration steps,
listed below, if all of the following conditions are true:

❑ You will use all of the software default values.

❑ You intend to use the Ethernet Adapter to connect an

Ethernet-ready device to an existing RangeLAN2
network.

❑ The existing network uses a Domain number between 0

and 9.

❑ You do not intend to set Security IDs on your network.

❑ You do not intend to configure the Ethernet Adapter

with an IP address.

Follow the steps below to install the RangeLAN2 792x Ethernet
Adapter:

1. Firmly screw the antenna onto its connector in a clock-

wise rotation.  The antenna connector is located on the
side of the unit as shown in Figure 2.