PROLINK Huricane 9200/S User Manual
Hurricane 9200/S ADSL Ethernet Router User’s Guide
20
(
,
4
Quick Start Part 2 provides instructions for configuring the Internet
settings on your computers to work with the Hurricane 9200/S.
+ ,
'
By default, the Hurricane 9200/S automatically assigns all required
Internet settings to your PCs. You need only to configure the PCs to
accept the information when it is assigned.
Note
In some cases, you may want to assign Internet information
manually to some or all of your computers rather than allow the
Hurricane 9200/S to do so. See “Assigning static Internet
information to your PCs” on page 25 for instructions.
If you have connected your PC via the USB port, see the
USB configuration instructions on page 26 (H9200 only).
If you have connected your PC(s) or LAN via Ethernet to
the Hurricane 9200/S, follow the instructions that
correspond to the operating systems installed on your PCs.
5 " # 6 7
1. In the Windows task bar, click
, and then click
Control Panel
.
2. Double-click the Network Connections icon.
3. In the LAN or High-Speed Internet window, right-click on the
3. In the LAN or High-Speed Internet window, right-click on the
icon corresponding to your network interface card (NIC) and
select
Properties
. (Often, this icon is labeled Local Area
Connection).
The Local Area Connection dialog box displays with a list of
The Local Area Connection dialog box displays with a list of
currently installed network items.
4. Ensure that the check box to the left of the item labeled
Internet Protocol TCP/IP is checked, and click
.
5. In the Internet Protocol (TCP/IP) Properties dialog box, click
the radio button labeled
Obtain an IP address
automatically
. Also click the radio button labeled
Obtain
DNS server address automatically
.
6. Click
twice to confirm your changes, and close
the Control Panel.