Printek Mt3-II Series User Manual
Operation
Initial Power Up And Self-Test
Once the Battery is charged and the paper is loaded, perform an initial power up self-test.
1. To start the self-test, press and hold the FEED button, then press ON . The printer will start printing
the self-test messages.
2. Press the OFF or FEED to stop or cancel the self-test print.
The first few lines of self-test show the printer firmware version, the current printer settings and a list of any
optional or special features installed. Also, sample lines are printed using the printer resident fonts and bar
codes.
optional or special features installed. Also, sample lines are printed using the printer resident fonts and bar
codes.
8