Polaroid Polaview 305 User Manual
6 Exit the menus and restart your computer (do not turn off the
projector).
Macintosh displays
The next table shows typical sense-line settings for Macintosh
systems, based on the system resolution. Try these settings
only if you have trouble projecting an image without an exter-
nal monitor connected to the computer.
systems, based on the system resolution. Try these settings
only if you have trouble projecting an image without an exter-
nal monitor connected to the computer.
Remember to restart your computer after you make these
changes.
changes.
Display resolution
Sense-line setting(s)
640 x 480
Sense 3: High
Sense 2: High
Sense 1: High
Sense 0: Low
Sense 2: High
Sense 1: High
Sense 0: Low
1152 x 870
Sense 3: High
Sense 2: Low
Sense 1: Low
Sense 0: Low
Sense 2: Low
Sense 1: Low
Sense 0: Low
832 x 624 and
Your system needs a Macintosh termina-
1024 x 768
tor. Try the Macintosh Sync Adapter
(02-20-UNV) available from Griffen Com-
munications Corp., 1451 Elm Hill Pike,
Park Elm Bldg, Suite 100, Nashville TN
37210 (615) 399-0990 fax: (615) 399-7060.
(02-20-UNV) available from Griffen Com-
munications Corp., 1451 Elm Hill Pike,
Park Elm Bldg, Suite 100, Nashville TN
37210 (615) 399-0990 fax: (615) 399-7060.
Identifying
To determine the current sense-line setting:
sense-line settings
1 Connect the projector to the computer and the monitor.
2 Make sure all hardware is turned on and that the correct resolu-
tion is displayed on the monitor and through the projector.
3 Open the projector menus and choose Input Source,
Input Measurements. The four sense-line settings appear in the
window.
window.
122 Appendix C