Polaroid Polaview 305 User Manual
Replacing the lamp
For best performance, you should replace the lamp after 700
hours of operation.
hours of operation.
Note: Do not touch the lamp with your bare hands. Use
gloves or a soft cloth and handle it using the metal ends
only.
gloves or a soft cloth and handle it using the metal ends
only.
Removing
1 Leave the projector running with the lamp off for at least
the old lamp
five minutes before you change the lamp. This allows the
fan to cool the lamp chamber.
fan to cool the lamp chamber.
2 After the lamp has cooled sufficiently, turn off the projector
and unplug the power cord. (As a safety feature, you cannot
open the lamp chamber until you disconnect the power
cord )
open the lamp chamber until you disconnect the power
cord )
3 Slide the AC lock button in the direction of the arrow. You
cannot move this button until you disconnect the power
cord from the projector.
cord from the projector.
4 As you slide open the AC lock button, remove the left side
cover by sliding it about 1/4 of an inch to the left. When the
cover releases, pull it straight off.
cover releases, pull it straight off.
Sliding the
rear panel off
of the projector
rear panel off
of the projector
Maintenance 89