Pitney Bowes DM230L User Manual

5.  Clean the brush in plain water, and rinse thoroughly.
6.  Position the brush as shown above so its bottom edge is under the 

mounting tabs.

7.  Slide the brush back toward the rear of the moistener.

3.  Place the wick in the holder.
4.  Reinstall the wick and holder assembly.

1.  Remove the holder and wick from 

the moistener as shown here.

2.  Clean the wick in plain water, and 

rinse thoroughly.

1.  Line up the yellow tab with the 

yellow slot.

2.  Slide the moistener tank into 

position on the mailing machine 
base until the release lever 
snaps into position. See the 
figure at right.

3.  Resume operation.