Pitney Bowes DM230L User Manual

1.  Press the Options key twice.
2.  Select Ink Functions, then Print Test. The display prompts you to  

insert an envelope. 

3.  The system prints a test print on the envelope or tape strip.
4.  Carefully examine the test print. It should be sharp and clear as shown 

in the "Good" example below. If the print has gaps as shown in the 
"Bad" example, it is not acceptable.

5.  Press Yes (Enter) if print quality is okay. The display returns to the 

Ready screen.

6.  Press No (Options key) if print quality is poor. The screen displays all 

of the maintenance options again.

7.  Perform another maintenance routine as described in Purging the 

Printhead. Then repeat the print test. 

 

If the print quality remains poor after repeating the maintenance  
routine and running the print test again, you may need to replace the 
printhead. Refer to Replacing the Printhead section in this chapter.