Pitney Bowes DM230L User Manual

•  The power cord wall plug is the primary means of disconnecting the 

machine from the AC supply.

•  Do not use an adapter plug on the line cord or wall outlet. Do not  

remove the ground pin from the line cord.

•  Avoid using wall outlets controlled by wall switches or shared with 

other equipment. Your mailing machine performs periodic maintenance 
cycles automatically to assure best print quality; leave it ON at all 
times. Do not route the power cord over sharp edges, or allow it to be 
trapped between furniture and/or furniture and the wall.

•  Avoid touching moving parts or materials while the machine is in  

use. Keep hands, loose clothing, jewelry, and long hair away from all 
moving parts.

•  Keep your hands out of the ink cartridge refill holder.
•  Do not remove covers. Covers enclose hazardous parts that should 

only be accessed by properly trained service personnel.

•  Before clearing a stall, be sure machine mechanisms come to a stop. 

When removing stalled material, avoid using too much force to protect 
against minor personal injury and damaging equipment.

•  Immediately report to Pitney Bowes Service any damaged or  

non-functioning components. The unit may be unsafe for use.

•  To prevent overheating, do not cover the vent openings. At times vent 

openings may not be visible, but still allow ample spacing around the 
unit for ventilation.

•  Do not place lighted candles, cigarettes, cigars, etc., on the mailing 

machine.

NOTE:  Always follow the specific occupational safety and health standards for 
your workplace.