Pitney Bowes DM230L User Manual

1.  From the Ready screen on the  

IntelliLink

TM

 Control Centre, rate your 

mail piece by weighing it on the optional 
weigh platform or by entering the weight 
manually (press Class and then select 
Manual Weight Entry). Then select a 
class for the mail piece and any desired 
special services. 

2.  Press the Tape key.
3.  The system display prompts you to  

enter the number of tape strips you  
want to print.

4.  Key in the number you want. You can 

enter a number ranging from 1 up to a 
maximum of 50. 

5.  Press the Enter key. The system automatically feeds and prints the 

number of tapes you entered with the postage value you selected.  
The display says “Printing Tape...” and shows the number of tapes  
remaining to print. 

 
  

 NOTE: The DM230L does not have a Tape Strip dispenser. In order to process 
a parcel you must use a Tape Sheet which is run throught the feeder like an 
envelope. To order Tape Sheets refer to Chapter 8 – Supplies and Options.

The procedures for printing postage on tapes strips are different for the 
DM230L/DM330L and the DM350L systems. Refer to the appropriate  
procedure in this section.

Use tape strips to apply postage to larger envelopes or parcels. You can 
print tape strips one at a time or in batches of up to 50. If you need to load 
tape strips, see Chapter 6 in this guide.