Pitney Bowes DM230L User Manual

The following outlines the procedure for processing a parcel using  
the optional Parcel rate module.
1.   Place your mail piece on the integrated weigh platform or enter the 

weight manually through the following steps:
a.   Press the Class button and then select Enter Manual Weight  

(option 6)

b.   Enter the weight in kilograms and then press Enter to confirm  

and the system will take you to the class selection option menu 
(skip to step 3).

2.   If you used the integrated weigh platform to weigh your mail piece  

then press the Class button and select Change Class (option 1).

Additional sub-class selections and processing steps are required  
depending on which class selection, and country destination  
(Domestic, US, International) you select. The steps for the different  
country destinations are outlined below.

3.   Press the Class button and then select Change Class (option 1). For 

domestic parcels you must choose either Domestic Parcel (option 2) 
or Dom Priority (option 3.). Make your selection and then press Enter 
to confirm.

4.   Select your desired sub-class and press Enter to confirm. For more 

information on Canada Post Distribution Services (shipping products 
and services) log on to www.canadapost.ca.

5.   Select which destination identifier you would like to use (Code / Zip or 

Zone). Based on your selection you will need to enter the appropriate 
Postal Code or Zone using the numeric keypad and / or QWERTY  
keyboard. The system will prompt you when a valid entry is made. 
Press Enter to confirm.

6.   Select any appropriate Special Services you desire by following the 

prompts on the display. Once you have completed your selection the 
system will take you to the Home screen. The postage value will be 
displayed in the top right hand corner and the message “Ready to 
Print” will be displayed below.

7.   The procedures for printing postage for parcels varies depending on 

which system you have:
a.   DM230L – Insert a Tape Sheet into the Feeder to print your post-

age and upon completion affix the postage indicia to your parcel.

b.   DM330L / DM350L – Press the Tape button. Enter the number of 

Tape Strips you want to print from the Tape Strip feeder and press 
Enter to confirm. Upon completion affix the postage indicia to your 
parcel.